No more than 32′ can be run in the same line. Having said this, for a 128′ application, you would need to run 4 different lines of low-voltage wire. Even though the strip light can be cut every 2″, we recommend only cutting each strip light once. Since there is a lead wire on each end, if you cut the strip light once, you end up with 2 shorter strip lights. If you want to cut the same strip light for a second time, you would need to use a connector (to give you lead wire to do the connection), which compromises the fixture & connection, and would not be covered by warranty. Having said this, if you have 4x 2′ steps, we recommend using 2x 16 ft strip light.
Ideal for Illuminating round steps, patio table cabinets, and more. Easy to Install, stick the strip light to a dry, clean surface for use. 3M Strong adhesives and strong clips ensure your light will not fall or hang. Trim the strip light to desirable lengths to satisfy your DIY home lighting needs.
Specs & Features:
- Color Temperature: 2700K Soft White, 3000K Warm White, or 4000K Natural White
- Voltage: 12V / 24V AC
- Wattage: 0.75W per ft
- FCC Compliant
- Waterproof: Yes IP67
- Dimmable: Yes
- Dimensions: 3/8”x 16’ or 32′
- Mounting: 3M Tape ( make sure to clean the surface beforehand)
- It can be cut every 4 inches
- Max load: 32′
- Wiring: Wire lead on both ends